Atomos Ninja TX GO 5.2" Monitor-Recorder · 6K ProRes RAW · Wi-Fi 6E · NDI 6

Atomos Ninja TX GO 5.2" 6K ProRes RAW Monitor-Recorder with Wi-Fi 6E and Camera Control

The Atomos Ninja TX GO is a new monitor-recorder for cameras with an HDMI port. It has a 5.2-inch touchscreen at 1500 nits and records ProRes RAW up to 6K30 to a CFexpress Type B card or to an SSD via USB-C. Wi-Fi 6E, NDI 6 and Camera to Cloud are built in, so there are no extra modules to buy, and you can control the camera and tap to focus from the screen. It suits filmmaking, documentaries, vlogging and live streaming.

Key Features

• 5.2" IPS Full HD 1920×1080 touchscreen at 1500 nits showing 10-bit color (8-bit+FRC), covering 100% Rec.709, with HDR (HLG) support, so the image stays clear even in direct sun
• Records ProRes RAW up to 6K30, plus 4K60 and 1080p120 over HDMI. Works with cameras that output RAW over HDMI, such as selected Sony, Panasonic, Nikon, Canon and Fujifilm models
• Codecs come pre-installed with nothing extra to buy: Apple ProRes, ProRes RAW, Avid DNxHD/DNxHR and H.265
• HDMI 2.0 input and output with locking connectors help prevent cables from coming loose during a shoot, and pass the video on to a second monitor or a transmitter
• Records to both CFexpress Type B cards and SSDs via USB-C. Note that RAW files must be recorded to a CFexpress card only
• Control the camera and tap to focus from the screen, adjust ISO, shutter, aperture and white balance, and start or stop recording. Works with supported cameras such as Sony, Canon, Nikon, Fujifilm, Panasonic and Z CAM
• Built-in Wi-Fi 6E and NDI 6 / HX3 lets it act as a source or destination on an NDI network, and send video to Atomos monitors that support receiving
• Send files to the cloud right away (Camera to Cloud) by uploading directly to ATOMOSphere, Adobe Frame.io or Dropbox, with 20GB of free ATOMOSphere storage
• Professional shooting tools: Focus Peaking, Zebra, False Color (ARRI / EL Zone), Waveform, RGB Parade, Vectorscope, 3D LUT (.cube) and Anamorphic De-squeeze
• Tally light and red screen border show recording status clearly, suited to live and multi-camera work
• Two power options: NP-F (L-Series) batteries, or power via USB-C PD 30W
• Linux-based AtomOS operating system with fast start-up, cooler operation than before, and firmware updates over Wi-Fi (OTA)

Specifications

In the Box

• Ninja TX GO Monitor-Recorder
• USB-C Locking Cable Adaptor
• HDMI Locking Cable Adaptor
• USB-C Locking Cable (45 cm)
• Wi-Fi Antenna ×2
• Antenna Tip Set ×5 (black, white, yellow, green, red)
• Quick Start Guide